Skip to main content ↑ ↓
Topic: Norcold Controller Problem (Read 546 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Norcold Controller Problem

Yahoo Message Number: 78118
The Set Temp button on my 1200 LRIM has stopped working or at least appears to have. Pushing it no longer displays the temp setting number. Anyone seen this before?

Don Seager

2004 Allure 31046

Re: Norcold Controller Problem

Reply #1 –
Yahoo Message Number: 78119
Yes, I found the connections in the display had gone green. Pulled it apart and unplugged & plugged the connector several times and it came alive.
Just one of the reasons we tossed the Nevercold and installed a Samsung.

Jim

07 Allure #31570

Re: Norcold Controller Problem

Reply #2 –
Yahoo Message Number: 78120
Thanks Jim but I did as you suggest and the connectors are clean, no green but I re-plugged it a couple of times anyway.
Guess it is out to the controller and do a reset and wiring check out there.
I replaced the cooling unit with a new Amish unit a year ago last Dec. It has worked great since keeping the freezer below zero and the box at 35 degrees. Now it is not cooling well and I am starting the troubleshooting process. Back in Dec I didn't want to give up the propane option and the Amish unit offered a cheaper solution. So I need to get a little more mileage out of it if I can. The Samsung replacement is now on my list but a bit away for now.

Don Seager

2004 Allure 31046