Skip to main content ↑ ↓
Topic: Turn signal switch-high beam switch (Read 805 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Turn signal switch-high beam switch

Yahoo Message Number: 79782
Hi All,

My high beam switch has stopped working on my 07 Allure. The switch will not change from high beam to low beam and it has stopped clicking. Has anyone replace the turn signal/high beam switch? Any ideas as to where to purchase the switch and how difficult is it to replace.

Thank you,

David

07 Allure 470

Re: Turn signal switch-high beam switch

Reply #1 –
Yahoo Message Number: 79829
Hi David,

Had a similar problem but I lost the headlights completely. Turned out to be the contacts inside the switch mounted inside the steering column. I was able to make repairs but it wasn't easy and I am not real confident that it will last so I purchased a new switch from Country Coach. It's easy to replace the switch as a whole. The covers on the steering column pop off. Just work the connectors (2) off the switch and remove a couple of screws. Reverse to install the new switch.
Here's the manufacturer and part number of mine. Not sure if yours is the same or not.
http://www.moenracing.com/images/Turn_signal_switch2.jpg
Also you might check EBay and Amazon as I saw one there after I bought mine.

Good luck,

Barney

07 Inspire 52059