Skip to main content ↑ ↓
Topic: Medicine cabinet shelving (Read 532 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Medicine cabinet shelving

Yahoo Message Number: 83097
I have a medicine cabinet approximately 42 inches wide by 36 high that has a single horizontal shelf in the middle creating 2 shelves about 18 inches high. I need either another shelf or storage cubes to place inside to use the wasted height of the shelf.
Has anyone done anything about this? Is there a "perfect" product out there somewhere?

Thanks

John Shankland
2008 Inspire 52028

Re: Medicine cabinet shelving

Reply #1 –
Yahoo Message Number: 83104
John What I did was to add two shelve rails at each end of the cabnet and cut a pace of wood to fit then I could put the new shelve anywere inbetween.
I have a 2006 Inspire 360 #51668 hope this helps you.

Re: Medicine cabinet shelving

Reply #2 –
Yahoo Message Number: 83112
I just put my carpentry skills and rocket science background to work and built and additional shelf out of scrap walnut (to match the existing wood) and used small angle brackets to mount the added half-shelf above the existing shelf. I built it with a small lip around the edge and just the right size to hold a couple of Rubbermaid silverware drawer dividers so they act as removable modules to access all the small stuff that I stow in those two added trays. Our coach is a 2002 Intrigue, built the concept is the same.

Steve B

2002 Intrigue #11382