Skip to main content ↑ ↓
Topic: Oil Reservoir handle (Read 700 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Oil Reservoir handle

Yahoo Message Number: 91245
After my last oil change I discovered that the handle which is used to drain oil from the oil reservoir is missing. Does anyone know a part number that will work as a replacement or must I replace the entire valve with a new valve that has the handle.

Thanks.
Ray

2000 Intrigue 11040

Re: Oil Reservoir handle

Reply #1 –
Yahoo Message Number: 91246
Ray

Mine uses a regular 3/4 inch ball valve that you can buy at Home Depot. Mine is female threaded with two hose barbs screwed into it and held by two hose clamps Hope this helps.

Rex 2003 intrigue 115453

Re: Oil Reservoir handle

Reply #2 –
Yahoo Message Number: 91259
Thanks, Rex. I am hoping that the Home Depot ball valve has a removable handle so that I can just buy the valve and remove the handle and put it onto my valve, I wouldn't want to try to change out the valve myself but I can probably do that if it becomes necessary.

Ray 2000 Intrigue 11040