Skip to main content ↑ ↓
Topic: Front sway bar bushings/brackets (Read 2324 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Front sway bar bushings/brackets

Yahoo Message Number: 95306
I've read several posts related to the Holland-Neway sway bar brackets breaking and taking out the front ride height adjuster. My bushings must be pretty hard since they creak and groan unless I keep them sprayed with RuGlyde. Before we head out soon for a 3 month trip, I am thinking of being proactive and replacing the brackets. Is this a DIY job? I know I can get the parts from Kevin Waite.

It looks as simple as R/R two bolts but is there tension on that bar that I need to deal with or do I need to support the weight of the bar as the bracket/s are removed.

Gary

'07 Allure 470 31578

Re: Front sway bar bushings/brackets

Reply #1 –
Yahoo Message Number: 95313
Gary do not know if yours is the same as my 04 Intrigue but mine broke. It did not damage anything else. Kevin sent new ones and I replaced without problem. As you start to loosen the bolts you will be able to see if their is any tension.

Lowell

04 Intrigue #11725

Re: Front sway bar bushings/brackets

Reply #2 –
Yahoo Message Number: 95317
Gary, One of my brackets broke. Kevin sent me new brackets and bushings. Its a very simple 30 minute job. Just do one side at a time and you should not have any problems. Mine had very little downward tension.
You might want to consider replacing your end link bushings as well. Mine were shot. I had oversized urethane bushings made from Energy Suspension. Welcome to Energy Suspension X-Treme Duty Products

image
Welcome to Energy Suspension X-Treme Duty ... On-Line Catalog Get Instructions Descriptions Of Our Product Line For Classes 1 thru 8
View on www.energysuspens...


RJ 2005 Inspire #51264

Re: Front sway bar bushings/brackets

Reply #3 –
Yahoo Message Number: 95321
How much bigger were the oversize bushings? did they fit into the regular size bracket? Thanks
Dave
07 Country Coach Allure 430 #31495
2 Jeep GC Toad
Mountains of So Cal


On Friday, May 9, 2014 4:50 AM, "Ron Jacobs RONANDSUE74@... [Country-Coach-Owners]" wrote:

Gary, One of my brackets broke. Kevin sent me new brackets and bushings. Its a very simple 30 minute job. Just do one side at a time and you should not have any problems. Mine had very little downward tension.
You might want to consider replacing your end link bushings as well. Mine were shot. I had oversized urethane bushings made from Energy Suspension. Welcome to Energy Suspension X-Treme Duty Products

image
Welcome to Energy Suspension X-Treme Duty ... On-Line Catalog Get Instructions Descriptions Of Our Product Line For Classes 1 thru 8
View on www.energysuspens...


RJ 2005 Inspire #51264




On Thursday, May 8, 2014 6:26 PM, "peggylow@..." wrote:

Gary do not know if yours is the same as my 04 Intrigue but mine broke. It did not damage anything else. Kevin sent new ones and I replaced without problem. As you start to loosen the bolts you will be able to see if their is any tension.

Lowell

04 Intrigue #11725




Dave & Jodi
2007 CC Allure 40’ Tag #31495
2012 Jeep GC
Big Bear Lake, Ca & Henderson, Nev

Re: Front sway bar bushings/brackets

Reply #4 –
Yahoo Message Number: 95322
Dave,

I was referring to the end link bushings not the sway bar mounding bushings. RJ 2005 Inspire #51264