Skip to main content ↑ ↓
Topic: Thermostat (Read 533 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Thermostat

Yahoo Message Number: 101578
I have been reading about resetting a 5 button unit, anyone know how to reset a 4 button unit?

Mike

97 Intrigue

Re: Thermostat

Reply #1 –
Yahoo Message Number: 101579
"‹For 4 button reset:

Turn the ON/OFF switch to ON. The display light with data should come on. If the light and data are not there, see Section B2 Cable Assembly.

Depress mode to activate display light.
Depress the bottom two buttons (up & down) together.
While still holding the two buttons add the third from the bottom (mode) , hold all three for a few seconds.
Release the third (mode) button.

Release the bottom two (up & down) together.
Depress the mode button. The display light should be off. If not, repeat steps 2 through 6.

The control should return to the default setting of 68*F for heating mode and 72*F for cooling mode.
Hope this helps.

Dave Trotter 01 Intrigue 11215

Re: Thermostat

Reply #3 –
Yahoo Message Number: 101582
I don't have any 1st hand experience with this particular problem, so I can't offer any guidance other than what I've gleaned from this board over the years.

Dave Trotter