Skip to main content ↑ ↓
Topic: Backup camera (Read 1074 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Backup camera

Yahoo Message Number: 99419
We admit we are new to this Country Coach fancy stuff. Got our hydro hot serviced and it now works. Now onto the next problem. We have a 2005 Allure Seaside that has a Pioneer, CD player, backup camera, GPS. We can't get the backup camera to come on. In looking at the manual it says to open the screen without it turned on. Well, when you push the little button to have the screen flip up it automatically turns on. Then it says to use the remote control to program it.  I have tried every button on the thing, plus tried turning the backup camera on at the control to the left of the driver's wheel. I hit the src button and it only gives me XM, Radio, or CD.  I have tried to use the remote, but obviously doing something wrong. So, first how do you get the screen up without it turning on?

Re: Backup camera

Reply #1 –
Yahoo Message Number: 99421
First check and wiggle the wires underneath the dash. Ours vibrates loose and we have to plug it back in.

If that doesn't work, here's the directions for resetting the unit to recognize the backup camera: On our coach, the camera switch is a toggle switch to the left of the driver's seat. It enables you to toggle between backup camera view and the stereo function.

You have to reset the unit to recognize the camera. We have model AVH-P6400CD.
Here's the directions for ours:
1. Turn your backup camera switch off.
2. Turn on the Pioneer system and watch the Dolphins jump.
3. Push the center of the round blue button on the right side of the stereo.
4. Note: (The blue round button has 5 positions, up-down-right-left and center)
5. Using the blue round button, push the bottom and scroll down to "SETUP"
6. Push the center of the blue round button to select "SETUP"
7. "VIDEO SETTING" should be highlighted, if not, using the blue button, scroll down to "VIDEO SETTING"
8. Push the center of the blue button to select "VIDEO SETTING"
9. Using the blue round button, push the left side and scroll over to "BACK UP CAMERA"
 10. On that same screen, the bottom right corner should read 'BATTERY', if it does, skip to step 13.
11. If bottom area reads GND, then using the blue round button, scroll down and highlight that box.
12. Using the blue round button, push the left side and scroll to 'BATTERY'.
13. Next, push the little silver button labeled "WIDE" 3 TIMES, or until your radio comes back on. This button is to the immediate left of the blue round button.
14. Turn on your "CAMERA" switch and your camera should be working. whew!!

Lonny & Diane Livingston
'04 Allure #31065

Re: Backup camera

Reply #2 –
Yahoo Message Number: 99455
If you have low battery power your  camera won't work and musst be reset after you get battery power it must be reset.  !. switch camera off on consol.  2.push menu button under screen.  3. touch set-up.  4. touch B-cam.  5. Touch left arrow to camera on.  6.  Switch camera on on consol.

Dave 2005 Allure #31284
--------