Skip to main content ↑ ↓
Topic: Entry door button (Read 1079 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Entry door button

Yahoo Message Number: 105317
After removing my door panel on my 09 Allure to do some preventive maintenance I discovered a small button, electrical I believe, that is not visible when the panel is in place. It is located behind the door lever assembly and can be actuated by removing a small black plug on the interior door lever face plate if you will. Does anyone know what the button is for? Possibly an override for the power lock? Any info would be helpful! Thanks!

Dennis Loving

'09 Allure Crane Prairie #31700
'15 Jeep Grand Cherokee toad

Re: Entry door button

Reply #1 –
Yahoo Message Number: 105319
Dennis. That could be a programming button for the remotes. Your.manuals should Provide instructions Bob. 06 intrigue. 12047

Re: Entry door button

Reply #2 –
Yahoo Message Number: 105324
Thanks Bob! Never thought of that. I'll pull my "tub" of manuals out and look thru it!

Dennis

Allure 31700

Re: Entry door button

Reply #3 –
Yahoo Message Number: 105332
I think it is your programming button for the security system.

George in Birmingham
'03 Magna 6298
George in Birmingham
2003 Magna 6298

Door button

Reply #4 –
Yahoo Message Number: 105321
After removing my door panel on my 09 Allure to do some preventive maintenance I discovered a small button, electrical I believe, that is not visible when the panel is in place. It is located behind the door lever assembly and can be actuated by removing a small black plug on the interior door lever face plate if you will. Does anyone know what the button is for? Possibly an override for the power lock? Any info would be helpful! Thanks!

Dennis Loving

'09 Allure Crane Prairie #31700
'15 Jeep Grand Cherokee toad