Skip to main content ↑ ↓
Topic: 04' cc Inspire -Atwood water heater question (Read 1423 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

04' cc Inspire -Atwood water heater question

Yahoo Message Number: 111440
Does anyone know if the atwood 10 gallon water heater in the 04' cc Inspire have a anode in the water heater? If so, what is the size & the (cameo) part #?

Abe

Re: 04' cc Inspire -Atwood water heater question

Reply #1 –
Yahoo Message Number: 111445
No. They don't use anodes. The Suburban water heaters use the anodes.

Jock Vargo

Re: 04' cc Inspire -Atwood water heater question

Reply #2 –
Yahoo Message Number: 111451
Atwoods have aluminum tanks and do not use anode rods. Suburbans have steel tanks and use anode rods.

Rich 2002 Magna

Re: 04' cc Inspire -Atwood water heater question

Reply #3 –
Yahoo Message Number: 111454
Would using an anode in the Atwood water heater be of any benefit? Thanks
Vince

Intrigue 11332

Re: 04' cc Inspire -Atwood water heater question

Reply #4 –
Yahoo Message Number: 111479
No.

And it might (it did in mine) cause problems draining it (dissimilar metals make the anode hard to remove from the drain). Atwood says use a nylon or plastic stopper in the drain. No metal.

Tim Gerrity
'02 Magna #6081