Skip to main content ↑ ↓
Topic: Ride height (Read 826 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Re: Ride height

Reply #1 –
Yahoo Message Number: 114980
Brian:

Below is the information that you are requesting.

Front: 8 5/8" Air Bag Height

Rear: 8" Bottom Of Frame Rail To Bottom Of Air Bag Mounting Plate

Tag: Dependent On Rear Axle Measurement

Kevin Waite
541-953-6162 (Cell)
kvn.wt.7629@...

Re: Ride height

Reply #2 –
Yahoo Message Number: 114981
Kevin - Way cool you continue to support and help, above and beyond just the financial part of also running a business:)! Always appreciate you sharing your knowledge, and parts - with the CC family.

THANK YOU!

And best to you, and all,
Smitty
04 Allure 31017

(My favorite Kevin story, was from our trip to Alaska. Broke the screen door handle just South of the Alaskan border. MacGyver'd the screen door shut with a bungee cord (Just a few flying insects in the region:)!). The same day I called him, Kevin sent a replacement handle to Tok, AK Post Office General Delivery. We picked it up and installed it three days later as we were in Tok and Chicken, AK area. I tried to get a bill from him, but must have slipped thru the cracks of his day to day happenings. Flash forward almost a year later, our next time in the Eugene area. My DW and I 'Stalked' Kevin's address, and asked a nice lady doing yard work if she knew Kevin? Well, it was his wife, and she went into the home and Kevin came out. So I got to meet him, and pay him in person, for that screen door latch handle!!) (Kevin is good people!! And I know, most of you know that already:)!)
04 Allure Sold to a nice new owner! Now enjoying a 07 Magna Rembrandt 45' ISX600 #6775
"We're ONDROAD for THEJRNY!" (Toad and Coach license plates, say Hi if you see us!)

Re: Ride height

Reply #3 –
Yahoo Message Number: 114982
Kevin,

Would you be willing to share the ride height information for a 1999 Intrigue ?
Thanks in advance.

Jerry & Brenda Azzara
1999 Intrigue Chefs Delite
#10702

Re: Ride height

Reply #4 –
Yahoo Message Number: 114983
I am sure he would, Kevin does a great job of support. Also, the IRV2 forum has lots of information.

Wally & Elta Mae
2007Allure 470 Sunset Bay #31535

Re: Ride height

Reply #6 –
Yahoo Message Number: 114985
Smitty:

It is ALWAYS a pleasure helping out all the CC Owners when at all possible.

Kevin Waite
(541-953-6162)
kvn.wt.7629@...

Re: Ride height

Reply #7 –
Yahoo Message Number: 114986
Jerry & Brenda:

Disregard my last response because I do not believe a "99" Intrigue was built with a Tag Axle. With that being said
your Ride Height measurements would be as follows.

Front: 8" Bottom Of Frame Rail To Bottom Of Air Bag Mounting Plate

Rear: 7 1/2" Bottom Of Frame Rail To Horizontal Weld On Center Axle

Kevin Waite
(541-953-6162)
kvn.wt.7629@...

Re: Ride height

Reply #8 –
Yahoo Message Number: 114987
Neglected to add 40 ft. No tag. Thank you soo much for the information.

Jerry & Brenda Azzara
1999 Intrigue 40 ft. Chefs Delite
#10702

Re: Ride height

Reply #11 –
Yahoo Message Number: 114993
Kevin is "good people". I don't know if it's a good thing or not, but Kevin knows me by first name.

Dennis and Kathy Maloney
Katie the coach - '05 Allure 42'
Tom the toad - '17 Jeep Trailhawk

Re: Ride height

Reply #12 –
Yahoo Message Number: 115369
Thanks Kevin for the info. I'm assuming my 1998 Intrigue 36' (no tag or slides) is the same specs?

How safe and accessible is it for a home mechanic to adjust ride heights? Assuming there's clearance to crawl under the thing enough to access the adjustments (with jack stands for safety), is this something a retired passenger car mechanic can do int he driveway? Or does it require a shop with a pit or some other method to get under the coach while it is sitting on level ground?

I assume the process is to put the HWH system in 'travel' mode while parked on flat level ground with the wheels aimed straight ahead, and crawl under there with a tape measure and wrench?
Otherwise I need to find a chassis shop that can do it. I am actually going to HWH next month but they said they won't touch the ride height valves or anything not part of their system.

Thanks,
Mark M
1998 Intrigue #10661