Skip to main content ↑ ↓
Topic: CruisControl Problem (Read 953 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

CruisControl Problem

Yahoo Message Number: 114496

Greetings all.I have a nagging problem with my cruise control. Doesn't work, VIP makers of smart wheel said it was the Control box, new control box installed, no fix, Then they said Clock spring was bad ,(they don't make the clock spring)new clock spring still no fix, all voltages check out and smart wheel buttons do work, swapped with another wheel. Dash light comes on, no work Computer tested connected to J plug all parameters ok, experts stumped, so I'm on the net. anyone had this problem Thanks in advance

Jerry
2004 Inspire 51012.

Re: CruisControl Problem

Reply #1 –
Yahoo Message Number: 114497
Well, the basic questions: Did it ever work, Did you go read the directions in the manual, Do you have the tech document for the Smart Wheel?

Wally & Elta Mae
2007Allure 470 Sunset Bay #31535

Re: CruisControl Problem

Reply #2 –
Yahoo Message Number: 114498

Thanks for your reply, yes It did work I have owned this coach since 2005,have all the manuals and have talked with VIP several times( makers of smart wheel ) Shop ran a computer diagnosis and all parameters are normal, all voltages and continunity test done and check out. Just enquiring if anyone has had this problem.

Jerry
2004 Inspire 51012

Re: CruisControl Problem

Reply #3 –
Yahoo Message Number: 114500
Had the same problem on my 06 Inspire. The problem was a resistor in the printed circuit board located in the steering wheel. Took a friend who is a E.E. three days to find the problem. Hope this helps
Mike
2006 Inspire #51808
2016 Jeep Wangler

Re: CruisControl Problem

Reply #4 –
Yahoo Message Number: 114501
Check for a burned out brake light bulb. Also be sure your engine brake is off.

Mikee

Re: CruisControl Problem

Reply #5 –
Yahoo Message Number: 114502

Thanks Mike, I know where that PCB is and will have that checked out. Appreciate the reply

Jerry
2004 Inspire #51012
2009 Avalanche

Re: CruisControl Problem

Reply #6 –
Yahoo Message Number: 114504
Two thoughts: email CC and/or post on the IRV2 forum.

Wally & Elta Mae
2007Allure 470 Sunset Bay #31535

Re: CruisControl Problem

Reply #7 –
Yahoo Message Number: 114505

Thank you for your reply. Appreciate it

Jerry
2004 Inspire 51012
2009 Avalanche.

Re: CruisControl Problem

Reply #8 –
Yahoo Message Number: 114507
Is the Jake brake on? I know simple answer right, but it got me a couple times.

Alex