Mirror position set screws
Yahoo Message Number: 116654
Howdy All-
Sometimes with a particularly large gust while driving, or just the
right rig passing, the whole mirror head will move.
I've tried getting the 2 set screws out without any luck, just twisting
the allen wrench. I've applied oil several times and let it set, with no
change.
So, my question is has anyone had this same issue, and what was the
solution? And, I suggest you remove yours if you can say every 5 years
or so and lubricate?
I could drill them out until basically only treads left, then tap or use
a pic to try to pic out the remainders? I guess worse case is drill it
out 100% and put in the next larger size set screws?
Also, I just purchased 4 - 100ah LiFePO4 (lithium) batteries to replace
my lead acid domestic bank (6 - 6v) $3,600. Looking forward to that, and
will be doing a fair bit of boondocking in Mexico over the next 4
months, so I may have some updates on my comparison between the two.
Wes Owens
2000 CC Allure 36' #30443
Currently in Mexico