Skip to main content ↑ ↓
Topic: Dead Intellitec panels (Read 1119 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Dead Intellitec panels

Yahoo Message Number: 116988
Hi all,

I just purchased a 2006 Allure 470. Two of the Intellitec switch panels are dead. All others work, and all coach lights appear to work. I took a look at the multiplexer panel in the wardrobe, but it is not clear to me how to troubleshoot. Do the switch panels themselves pry out for access? The dead panels are backside of coach at head of bed (panel on other side of head of bed works) and the panel on the slide at the foot of the bed. Any ideas? Thanks much.

Larry Schultz
2006 Allure 470

Re: Dead Intellitec panels

Reply #1 –
Yahoo Message Number: 116990
I has some similar issues with my 2008 Allure. Someone recommended just pulling the dead panels out and unplugging the panel then plugging back-in. Mine started working again.
Good luck.

Buddy Bordes 08 Allure 31597

Re: Dead Intellitec panels

Reply #3 –
Yahoo Message Number: 116996
They now make devices that will send your HDMI signal over a coax cable (which you already have) and turn it back into HDMI for your bedroom TV. Here's one example from Amazon:

HDMI + IR over single 75ohm RG-6U Coax Cable Extender Balun Sender Receiver F connection Amazon.com: HDMI + IR over single 75ohm RG-6U Coax Cable Extender Balun.]Amazon.com: HDMI + IR over single 75ohm RG-6U Coax Cable Extender Balun

Rich 2002 Magna
As an Amazon Associate Country Coach Owners Forum earns from qualifying purchases.