Skip to main content ↑ ↓
Topic: heat blower/vents/returns on the floor blows cold (Read 1234 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

heat blower/vents/returns on the floor blows cold

Hi There: My questions is; when we turn the heat on, the vent on the floor under the sink blows cold air as does the vents under the bed? It blows cold whether I use the gas or electric setting. The bathroom vent in the back blows warm and the vent under the refrigerator blows warm. Any ideas?

Laura
2008 Magna donatello
#6954

Re: heat blower/vents/returns on the floor blows cold

Reply #1 –
Show us photo of AquaHot control panel. Feel the two lines downstream of check valves to see if warm, maybe a stuck check valve, tap with hammer. Feel both zone pumps, are they both running? How is diesel running? Shutting off early? Greg
06 Magna
2006 Magna Rembrandt C13
2016 Jeep GC toad

Re: heat blower/vents/returns on the floor blows cold

Reply #2 –
I think Greg is right. You likely have a stuck check valve. I have used the plastic handle of a screw driver to tap the valve.

Good luck.
George in Birmingham
2003 Magna 6298