Re: Step cover repair
Reply #4 –
I fixed the same problem on my 95 Magna 5280.
Originally it would respond to a tap with a hammer or wrench on the Actuator Bar hung from the ceiling of the Front Driver Side Bay. The step cover would perform well for about six months at a time.
10 years later, the Hammer effect was not effective. The limit switches inside the actuator were the items failing. They controlled the stopping point for the cover fore and aft.
I cut the wires to the limit switches releasing their hold on the slider. Then I wired around them and now rely on my thumb to know when to stop holding the switch.
Motor wire: ........... (CC) Country Coach wires
RED WIRE ------------- BLUE WIRE & YELLOW WIRE
BLACK WIRE ------------ BLACK WIRE & RED WIRE
or
YELLOW WIRE