Skip to main content ↑ ↓
Topic: Windshield Washer Hose Replacement (Read 693 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Windshield Washer Hose Replacement

Yahoo Message Number: 9171
The WS washer hoses on our '98 Intrigue need to be replaced. However, WS washer hoses in auto parts stores are a larger diameter. Has anyone replaced their original hoses? Where did you buy the hose? Did you run it *through* the wiper arm, as original, or secure it to the arm?

Dick (& Geri) Campagna
'98 36' Intrigue #10571
Mfd: 11/97

(at MB Travel Park, Myrtle Beach, SC)

Re: Windshield Washer Hose Replacement

Reply #1 –
Yahoo Message Number: 9173
Dick;

I had to replace the hose on our 95 Magna. Found the hose at auto zone parts store.
They had three different sizes in stock. If that doesn't work, try a aquarium store.
I ran it inside the wiper arm. A little difficult.
Steve

Magna 5220

Re: Windshield Washer Hose Replacement

Reply #2 –
Yahoo Message Number: 9175
Purchased hose from CC and it was a pain to install. Use lubricant, a screw soldered to a wire in order to pull it through the labyrinth. TWI 98 Allure 30255, now 2004 Intrigue

Re: Windshield Washer Hose Replacement

Reply #3 –
Yahoo Message Number: 9191
I replaced mine about three years ago with silacone tubing from the pet store in the fish tank section ,it is not black it ia a pal blue
it still looks like new. Remove the wipers and it is easier to replace the hose also if you are tired of chips in the black wiper armes now
is the time to remove the black paint ,and let the stainless steal show. Only the part that bolts to the wiper motor needs to be painted
do this before replaceing the hose