Skip to main content
Topic: Punctured Rear Air Bag (Read 1540 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Punctured Rear Air Bag

Yahoo Message Number: 536
I just returned from the local Cummins dealer where I had the left rear air bag replaced. A hole had been punctured in it. How did this happen? The CC dealer that performed my factory recall "Ride Height Control Valve Reconfiguration" installed the brackets for the two rear control valve rods too close to the airbags and the bolt that held the vertical rod to the bracket stuck out far enough to rub against the airbag and eventually wore a hole in it. The reconfiguration was done in February, 2001, so it took approximately five months of driving and wear to wear all the way through the air bag material. I have informed the factory service department that this happened and that they may see other occurences of the same.

Brian Davis
1999 Allure

Re: Punctured Rear Air Bag

Reply #1
Yahoo Message Number: 538
re the factory recall you mentioned on your allure 99, does anyone know if this recall was for the allure only or was it for all 99 country coachs, dave 99magna

Re: Punctured Rear Air Bag

Reply #2
Yahoo Message Number: 540
The recall is for Intrigue 95-00 #10110-10484 (gillig chasis) and dynomax #10338-11071

allure 96-00 30002-30509