Skip to main content ↑ ↓
Topic: Blackwater rinse revisited (Read 669 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Blackwater rinse revisited

Yahoo Message Number: 15013
Recently, there was some discussion of rinse ports becoming stopped up. I didn't have the problem, so I didn't pay too much attention.
Well, I do now and would appreciate some help from whoever had a solution.

Walt Rothermel
03Allure30811

Re: Blackwater rinse revisited

Reply #1 –
Yahoo Message Number: 15017
Walt, thread #14686 is the one that discusses the Sani-Flush cleaning.
Bob

05 Intrigue LE #11872

Quote from: spiker1029
Recently, there was some discussion of rinse ports becoming

stopped

Quote
up. I didn't have the problem, so I didn't pay too much

attention.

Re: Blackwater rinse revisited

Reply #2 –
Yahoo Message Number: 15021
Thanks, Bob. Steve seems to have the answer ( thread 14692 ), at least I hope so. I didn't know I had a manual for this system, but will take a good look.

Walt Rothermel
03Allure30811

Quote from: bobstep

Blackwater rinse

Reply #3 –
Yahoo Message Number: 15025
I had this problem 2 or 3 times. Talked to some one at CC and they told me to take out sprayer and drill 1/8" holes in place of the small holes. I have done this and have not had any more trouble.
Knock On wood.