Skip to main content ↑ ↓
Topic: Noisy anemometer on Girard System (Read 792 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Noisy anemometer on Girard System

Yahoo Message Number: 15870
If any of you are experiencing noise caused by the anemometer which controls the closing of the awning under high wind speeds go to the Girard website which is
www.girardrv.com and get info on the replacement part which has steel cups and a bearing instead of the original which was plastic and had a bushing. I replaced mine and there is absolutely no noise in the coach. The Girard people are very accomodating and will probably give you a break on the new piece. I replaced mine myself, it is a simple job with minimal skill required.

Re: Noisy anemometer on Girard System

Reply #1 –
Yahoo Message Number: 15927
When I replaced the noisy anemometer with the one with metal cups, I later found that my controller box was not fully compatable. They provided a new controller (free). Let them know the model number of the controller when making this change to the quiet anemometer.

Herb

2002 Allure #30690

Quote from: Richard

> If any of you are experiencing noise caused by the anemometer which

controls the

Quote
closing of the awning under high wind speeds go to the Girard
website which is

Quote
www.girardrv.com and get info on the replacement part which has
steel cups and a

Quote
bearing instead of the original which was plastic and had a bushing.
I replaced mine

Quote
and there is absolutely no noise in the coach. The Girard people are

very

Quote
accomodating and will probably give you a break on the new piece. I
replaced mine