Skip to main content ↑ ↓
Topic: HWH slide control failure (Read 712 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

HWH slide control failure

Yahoo Message Number: 19834
This has happened several times to us. When you turn on the power key at the slide control panel, nothing happens ... no lights. Hitting the "HWH" reset button restores power, the lights come on, and everthing is ok.

This am, the same thing happened, but hitting the reset button just produced a click from below (the control bay under the drivers seat), and turning the key on produced another click. Checking the control board cluster, I saw three red led's, apparantly and error message of some kind. When we reset with the key off, the led's went out ... turning on the key produced the second click, and the led's came back on.

The click comes from inside the control boxes, and I assume its a relay.
All of a sudden it started working agian, so I didn't get a chance to write down whick led's came on. I had unplugged every connector, and replugged, but I don't think this had anything to do with it starting to work.

Calling HWH, but I thought I would check and see if anyone has been thru this.

Thanks for any assistance ..

John and Terry
2005 Affinity

HWH slide control failure

Reply #1 –
Yahoo Message Number: 19835
This has happened several times to us. When you turn on the power key at the slide control panel, nothing happens ... no lights. Hitting the "HWH" reset button restores power, the lights come on, and everthing is ok.

This am, the same thing happened, but hitting the reset button just produced a click from below (the control bay under the drivers seat), and turning the key on produced another click. Checking the control board cluster, I saw three red led's, apparantly and error message of some kind. When we reset with the key off, the led's went out ... turning on the key produced the second click, and the led's came back on.

The click comes from inside the control boxes, and I assume its a relay.
All of a sudden it started working agian, so I didn't get a chance to write down whick led's came on. I had unplugged every connector, and replugged, but I don't think this had anything to do with it starting to work.

Calling HWH, but I thought I would check and see if anyone has been thru this.

Thanks for any assistance ..

John and Terry
2005 Affinity

Re: HWH slide control failure

Reply #2 –
Yahoo Message Number: 19837
Nevermind ...

I must not have pulled up hard enough on the parking brake knob.

I don't level in my driveway, i just dump the air. I went to level the MH to see if this had anything to do with it. Blinking LED said 'parking brake not set MORON'. Actually, I added the moron part.

Shows me once again ... check the obvious stuff first.

Sorry for the waste of forum space ...

John (the Moron) and Terry (married me anyway for some reason) 2005 Affinity