Skip to main content ↑ ↓
Topic: Transmission Temp postings to forum (Read 568 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Transmission Temp postings to forum

Yahoo Message Number: 23521
Please, when posting information about your experiences with transmission temps, include coach's year, model, engine, and method of determining the temperature (dash "christmas tree" gauges, or Silverleaf). Without the above, the information is almost useless.
By the way, at the rally, it was mentioned that one can determine if the tranny has logged a high temp alert. Unfortunately, I lost the codes that would be displayed. But to start the process, turn on the ignition key (but don't start the engine), then press the up and down arrow buttons simultaneously -- TWICE. Read the codes.

Herb

Forum Moderator

Re: Transmission Temp postings to forum

Reply #1 –
Yahoo Message Number: 23523
Coach is a 2006 Allure with the Cummins 400 ISL. All temp readings were based upon the silverleaf readings, not the gauges.

Quote from: Herb & Melitta\[br\
Strandberg"] >

Please, when posting information about your experiences with > transmission temps, include coach's year, model, engine, and

method of

Quote
determining the temperature (dash "christmas tree" gauges, or > Silverleaf). Without the above, the information is almost useless.

By the way, at the rally, it was mentioned that one can determine

if

Quote
the tranny has logged a high temp alert. Unfortunately, I lost

the

Quote
codes that would be displayed. But to start the process, turn on

the

Quote
ignition key (but don't start the engine), then press the up and

down