Skip to main content ↑ ↓
Topic: Heater Core (Read 895 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Heater Core

Yahoo Message Number: 35017
Just replaced my heater core, 98 Intrigue. CC sent me a procedure, pretty good but the illustrations were somewhat vague. Developed a leak in the core near Albuquerque. Bypassed the core using one of the hoses. Did all of the work via the compartment under the driver's window for the bypassing. Would have been much easier if I had removed the AC heat exchanger assembly.
If anyone is interested I can send or post the instructions sent by CC along with some comments and sketches that should make the task easier. CC said they though the task should take a dealer around 6 hours. Probably took me 12. New heater core was 3/16" longer and the input pipes were different, needed to modify some of the attachment bolts and brackets.

Called CC and they said that there is a pump in lines that carry the coolant to the core so plugging instead of bypassing may not be a good idea.

Joe Adams

98 Intrigue 10578

Re: Heater Core

Reply #1 –
Yahoo Message Number: 35018
Joe,

Could you send me the information you have about replacing the front heater core, mine is just beginning to leak.

Paul Resnick

98 Intrigue #10487

Re: Heater Core

Reply #2 –
Yahoo Message Number: 35023
Hi Joe,

If you could please send this information to me at electronically: skywagon180@..., or if you mean by snail mail, I will provide my address. Thanks for what you are doing.

Jim Hill

81138 2008 Tribute

2006 F250 Turbo Diesel towd

Re: Heater Core

Reply #3 –
Yahoo Message Number: 35059
Please send me the heater core information. Or of course you could post it on this site and then you would not have to send to all of these emails.

Thanks,

Joey & Debi '98 Intrigue #10540

Quote from: Joe

> Just replaced my heater core, 98 Intrigue. CC sent me a procedure, > pretty good but the illustrations were somewhat vague. Developed a > leak in the core near Albuquerque. Bypassed the core using one of

the

Quote
hoses. Did all of the work via the compartment under the driver's > window for the bypassing. Would have been much easier if I had > removed the AC heat exchanger assembly.
> If anyone is interested I can send or post the instructions sent by

CC

Quote
along with some comments and sketches that should make the task > easier. CC said they though the task should take a dealer around 6 > hours. Probably took me 12. New heater core was 3/16" longer and

the

Quote
input pipes were different, needed to modify some of the attachment > bolts and brackets.

Called CC and they said that there is a pump in lines that carry

the

Quote
coolant to the core so plugging instead of bypassing may not be a

good

Re: Heater Core

Reply #4 –
Yahoo Message Number: 35060
Me too please.

Larry 03 Allure 30856

Quote from: Joey

> Please send me the heater core information. Or of course you could > post it on this site and then you would not have to send to all of > these emails.

Thanks,

Joey & Debi '98 Intrigue #10540

[quote author=Joe"

>

> Just replaced my heater core, 98 Intrigue. CC sent me a

procedure,

Quote
pretty good but the illustrations were somewhat vague. Developed

a

Quote
leak in the core near Albuquerque. Bypassed the core using one

of

Quote
the

> hoses. Did all of the work via the compartment under the

driver's

Quote
window for the bypassing. Would have been much easier if I had > > removed the AC heat exchanger assembly.
>

> If anyone is interested I can send or post the instructions sent

by

Quote
CC

> along with some comments and sketches that should make the task > > easier. CC said they though the task should take a dealer around

6

Quote
hours. Probably took me 12. New heater core was 3/16" longer

and

Quote
the

> input pipes were different, needed to modify some of the

attachment

Re: Heater Core

Reply #6 –
Yahoo Message Number: 35076
A few folks were interested. We just landed in Orlando. I'll send it out in he next day or so. May decide to upload. Also may send to CC Tech support. They faxed it to me, too old to have emailable version. I did a text conversion. Tech support was very helpful and responsive.

Joe

Quote from: Joey
Please send me the heater core information. Or of course you

could

Quote
post it on this site and then you would not have to send to all of > these emails.

Thanks,

Joey & Debi '98 Intrigue #10540

[quote author=Joe"

>

> Just replaced my heater core, 98 Intrigue. CC sent me a

procedure,

Quote
pretty good but the illustrations were somewhat vague.

Developed a

Quote
leak in the core near Albuquerque. Bypassed the core using one

of

Quote
the

> hoses. Did all of the work via the compartment under the

driver's

Quote
window for the bypassing. Would have been much easier if I had > > removed the AC heat exchanger assembly.
>

> If anyone is interested I can send or post the instructions sent

by

Quote
CC

> along with some comments and sketches that should make the task > > easier. CC said they though the task should take a dealer

around 6

Quote
hours. Probably took me 12. New heater core was 3/16" longer

and

Quote
the

> input pipes were different, needed to modify some of the

attachment

Quote
bolts and brackets.
>

> Called CC and they said that there is a pump in lines that carry > the

> coolant to the core so plugging instead of bypassing may not be

a

Re: Heater Core

Reply #7 –
Yahoo Message Number: 35189
I uploaded a file today under Intrige_HeaterCore.doc for replacing the heater core in a 98 Intrigue.

Joe

98 Intrigue 10578

Quote from: Joe
A few folks were interested. We just landed in Orlando. I'll

send

Quote
it out in he next day or so. May decide to upload. Also may send > to CC Tech support. They faxed it to me, too old to have

emailable

Quote
version. I did a text conversion. Tech support was very helpful > and responsive.

Joe

[quote author=Joey"

>

> Please send me the heater core information. Or of course you > could

> post it on this site and then you would not have to send to all

of

Quote
these emails.
>

> Thanks,

> Joey & Debi '98 Intrigue #10540 > >
>

[quote author=Joe"
>]
> >

> > Just replaced my heater core, 98 Intrigue. CC sent me a > procedure,

> > pretty good but the illustrations were somewhat vague.
Developed a

> > leak in the core near Albuquerque. Bypassed the core using

one

Quote
of
> the

> > hoses. Did all of the work via the compartment under the > driver's

> > window for the bypassing. Would have been much easier if I

had

Quote
> removed the AC heat exchanger assembly.
> >

> > If anyone is interested I can send or post the instructions

sent

Quote
by
> CC

> > along with some comments and sketches that should make the

task

Quote
> easier. CC said they though the task should take a dealer > around 6

> > hours. Probably took me 12. New heater core was 3/16" longer > and
> the

> > input pipes were different, needed to modify some of the > attachment

> > bolts and brackets.
> >

> > Called CC and they said that there is a pump in lines that

carry

Quote
the

> > coolant to the core so plugging instead of bypassing may not

be

Re: Heater Core

Reply #8 –
Yahoo Message Number: 39245
I'm a late coming to this message. My sister (computerless) has a 98 Intrigue, #10636. We think the heater core is leaking up front, losing two gallons of collant per 1100 miles. We cannot find any leaks. CC replaced the heater core twice. Now we're going to have to do "something". We would any appreciate any information you can give us.
Jim Wehren

Quote from: Joe

> Just replaced my heater core, 98 Intrigue. CC sent me a procedure, > pretty good but the illustrations were somewhat vague. Developed a > leak in the core near Albuquerque. Bypassed the core using one of

the

Quote
hoses. Did all of the work via the compartment under the driver's > window for the bypassing. Would have been much easier if I had > removed the AC heat exchanger assembly.
> If anyone is interested I can send or post the instructions sent by

CC

Quote
along with some comments and sketches that should make the task > easier. CC said they though the task should take a dealer around 6 > hours. Probably took me 12. New heater core was 3/16" longer and

the

Quote
input pipes were different, needed to modify some of the attachment > bolts and brackets.

Called CC and they said that there is a pump in lines that carry

the

Quote
coolant to the core so plugging instead of bypassing may not be a

good