Skip to main content ↑ ↓
Topic: Powered Viors Inop (Read 478 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Powered Viors Inop

Yahoo Message Number: 40386
We went from Chester, CA up to Eugene, OR today where it's only 98F. I can't wait to get to the coast next week! On our way up, I moved the D/S visor down about halfway. I then tried to move the P/S visor and nothing happened. The button on the right of the P/S seat also would not energize the visor. Subsequently, I went to move my D/S visor back up and nothing happened! So now neither visor will move when their respective buttons are pressed. What was really weird was that I got the D/S to go down about half way and about an hour later it wouldn't retract, while the P/S would never move. Any ideas? Harry

06 Inspire 51933, on our long way to the CCI Reunion

Re: Powered Viors Inop

Reply #1 –
Yahoo Message Number: 40395
Have you checked the 12 volt supply to it? Might be an open fuse.

Mikee

Re: Powered Viors Inop

Reply #2 –
Yahoo Message Number: 40405
Thanx, Mikee, indeed it was a blown fuse. It must have blown just as I was lowering the D/S visor. Now I'm wondering why it blew. Thanx again.
Harry

06 Inspire 51933

Re: Powered Viors Inop

Reply #3 –
Yahoo Message Number: 40426
If you tried to operate both of them at the same time it may have overloaded the fuse... I would not worry about a one time event.. If it happens again it may warrant investigation.

Mikee